+44 (0) 1246 268900


FA-ST      Home       About Us       Contact Us      


Technical Info
Photo Gallery
Related links
Spill Protection
Company News
World News
Contact Us
Case Studies

Industrial Diesel Fuel Oil Filtration.

FA-ST offers a comprehensive service to all businesses that use diesel fuel oil. We have purpose built filtration rigs to specialise in filtering large volumes of fuel oil in storage tanks and holding/day tanks.

Many storage tanks accumulate dirt particles; rust, bacterial growth and water over periods of time and eventually the levels reach a point where the contaminated fuel starts to enter the outlet supply line which leads to filter blockage and results in power failure.

FA-ST can remove this contamination and also add additional filtration to existing piped systems.
This service is of particular interest to sites with bulk storage tanks e.g. Hospitals, Hauliers, Quarries, Office Blocks & Data Centres and all other sites that rely on stand by Generator support during mains power electrical maintenance and power failures.

FA-ST initially visits the site and evaluates the oil condition and will advise on any remedial work that is required. We are always pleased to quote for your particular requirements.



Industrial Diesel Fuel Oil Filtration

On Site System Filtration

If your machinery has suffered a component failure, for example, a ram break up, valve block failure, water ingress or any other contamination, this service is essential to get the machinery oil ISO level back to normal.

If you have a contaminated system FA-ST will either install a unit to your equipment, or use a filter rig and carry out the filtration process on-site. This service can also include the removal of hydraulic hoses and steel pipe assemblies and cleaning with compressed air and soft foam pellets. Filter rigs can be used to purge diesel tanks, clean storage tanks and as transfer rigs for new oil.

Filter rigs may be hired or purchased outright for customers own use.


Bank of Caterpillar generator engines fitted with KLEENOIL engine filters

Off Line Filtration Unit

On-Site installations of single and multiple units.
FA-ST will sample and/or test your system for contamination, and install the correct filtration unit for your application. Units are available for all types of plant and machinery in all industries and are suitable for hydraulic, engine, transmissions, diesel, gearboxes and many other applications. Installation takes approximately 1 to 2 hours depending on the application.

All units are available from stock. Boxed kits are available for self installation if required.



CATERPILLAR Engine fitted with KLEENOIL unit

On Site Particle Counting
On site particle counting is carried out during routine installations.

This is also offered as a separate service and is particularly useful after a system failure, after repairs or as a routine maintenance procedure. Instant readouts give the ISO levels of particle contamination.

In line particle counters can be installed on most systems.


CM 20 Condition Monitoring Particle Counter

Oil Sampling
Oil samples can be taken from LIVE or dormant applications.

These samples are then sent to the Laboratory for detailed analysis. From the results recommendations can be made for system cleaning.

Oil sampling points can also be installed.
See Technical Information for Tests carried out.

Maintenance and service contracts individually tailored to your company.


Oil Sampling

Pressure Testing
All systems can be tested to determine if there is a loss/gain of pressure. Pressure test points can be installed on most systems./ Pressure test kits are available for purchase and can be designed for your particular equipment needs.




Caterpillar 235 excavator fitted with engine and hydraulic units

Auxiliary Line Installations

Auxiliary lines are available for hammer, bucket, rotational , shears, quick hitch, tilt and many more circuits. Check valve circuits designed and installed for most types of plant and equipment.


Injection Molding machine fitted with KLEENOIL hydraulic unit

Contamination Control

This site will be updated with regular hints and tips for Contamination Control guidelines. FA-ST are also available for presentations for groups of people who wish to implement a Contamination Control Policy within their organization.


Industrial Generator fitted with KLEENOIL engine unit



For more information please contact:  info@fa-st.co.uk

Products & Services  
Oil Filtration Systems  
Engine By Pass Filter  
Hydraulic By pass Filter  
Filter Cartridges  
Filter Rigs  
Particle Counter  
Marine Services  
Filter Rig Hire  
Waste Oils  
Air Filter Pre-cleaners  
Oil Sampling Analysis  
Biodiesel Filtration  
Diesel Bug Treatment  
Water in Oil Sensor  
Magclamp (Hose & Pipe support) (new)  
Storage Tanks & Testing  
Engine Air Breather Filter


Appointed UK distributor for the
KLEENOIL product range of by pass filtration units for all types of hydraulic, transmission, diesel fuel and engine applications.